Google

version 3.6

DNAINVAR -- Program to compute Lake's and Cavender's
phylogenetic invariants from nucleotide sequences

© Copyright 1986-2002 by the University of Washington. Written by Joseph Felsenstein. Permission is granted to copy this document provided that no fee is charged for it and that this copyright notice is not removed.

This program reads in nucleotide sequences for four species and computes the phylogenetic invariants discovered by James Cavender (Cavender and Felsenstein, 1987) and James Lake (1987). Lake's method is also called by him "evolutionary parsimony". I prefer Cavender's more mathematically precise term "invariants", as the method bears somewhat more relationship to likelihood methods than to parsimony. The invariants are mathematical formulas (in the present case linear or quadratic) in the EXPECTED frequencies of site patterns which are zero for all trees of a given tree topology, irrespective of branch lengths. We can consider at a given site that if there are no ambiguities, we could have for four species the nucleotide patterns (considering the same site across all four species) AAAA, AAAC, AAAG, ... through TTTT, 256 patterns in all.

The invariants are formulas in the expected pattern frequencies, not the observed pattern frequencies. When they are computed using the observed pattern frequencies, we will usually find that they are not precisely zero even when the model is correct and we have the correct tree topology. Only as the number of nucleotides scored becomes infinite will the observed pattern frequencies approach their expectations; otherwise, we must do a statistical test of the invariants.

Some explanation of invariants will be found in the above papers, and also in my recent review article on statistical aspects of inferring phylogenies (Felsenstein, 1988b). Although invariants have some important advantages, their validity also depends on symmetry assumptions that may not be satisfied. In the discussion below suppose that the possible unrooted phylogenies are I: ((A,B),(C,D)), II: ((A,C),(B,D)), and III: ((A,D),(B,C)).

Lake's Invariants, Their Testing and Assumptions

Lake's invariants are fairly simple to describe: the patterns involved are only those in which there are two purines and two pyrimidines at a site. Thus a site with AACT would affect the invariants, but a site with AAGG would not. Let us use (as Lake does) the symbols 1, 2, 3, and 4, with the proviso that 1 and 2 are either both of the purines or both of the pyrimidines; 3 and 4 are the other two nucleotides. Thus 1 and 2 always differ by a transition; so do 3 and 4. Lake's invariants, expressed in terms of expected frequencies, are the three quantities:

(1)      P(1133) + P(1234) - P(1134) - P(1233),

(2)      P(1313) + P(1324) - P(1314) - P(1323),

(3)      P(1331) + P(1342) - P(1341) - P(1332),

He showed that invariants (2) and (3) are zero under Topology I, (1) and (3) are zero under topology II, and (1) and (2) are zero under Topology III. If, for example, we see a site with pattern ACGC, we can start by setting 1=A. Then 2 must be G. We can then set 3=C (so that 4 is T). Thus its pattern type, making those substitutions, is 1323. P(1323) is the expected probability of the type of pattern which includes ACGC, TGAG, GTAT, etc.

Lake's invariants are easily tested with observed frequencies. For example, the first of them is a test of whether there are as many sites of types 1133 and 1234 as there are of types 1134 and 1233; this is easily tested with a chi-square test or, as in this program, with an exact binomial test. Note that with several invariants to test, we risk overestimating the significance of results if we simply accept the nominal 95% levels of significance (Li and Guoy, 1990).

Lake's invariants assume that each site is evolving independently, and that starting from any base a transversion is equally likely to end up at each of the two possible bases (thus, an A undergoing a transversion is equally likely to end up as a C or a T, and similarly for the other four bases from which one could start. Interestingly, Lake's results do not assume that rates of evolution are the same at all sites. The result that the total of 1133 and 1234 is expected to be the same as the total of 1134 and 1233 is unaffected by the fact that we may have aggregated the counts over classes of sites evolving at different rates.

Cavender's Invariants, Their Testing and Assumptions

Cavender's invariants (Cavender and Felsenstein, 1987) are for the case of a character with two states. In the nucleic acid case we can classify nucleotides into two states, R and Y (Purine and Pyrimidine) and then use the two-state results. Cavender starts, as before, with the pattern frequencies. Coding purines as R and pyrimidines as Y, the patterns types are RRRR, RRRY, and so on until YYYY, a total of 16 types. Cavender found quadratic functions of the expected frequencies of these 16 types that were expected to be zero under a given phylogeny, irrespective of branch lengths. Two invariants (called K and L) were found for each tree topology. The L invariants are particularly easy to understand. If we have the tree topology ((A,B),(C,D)), then in the case of two symmetric states, the event that A and B have the same state should be independent of whether C and D have the same state, as the events determining these happen in different parts of the tree. We can set up a contingency table:

                                 C = D         C =/= D
                           ------------------------------
                          |
                   A = B  |   YYYY, YYRR,     YYYR, YYRY,
                          |   RRRR, RRYY      RRYR, RRRY
                          |
                 A =/= B  |   YRYY, YRRR,     YRYR, YRRY,
                          |   RYYY, RYRR      RYYR, RYRY

and we expect that the events C = D and A = B will be independent. Cavender's L invariant for this tree topology is simply the negative of the crossproduct difference,

      P(A=/=B and C=D) P(A=B and C=/=D) - P(A=B and C=D) P(A=/=B and C=/=D).

One of these L invariants is defined for each of the three tree topologies. They can obviously be tested simply by doing a chi-square test on the contingency table. The one corresponding to the correct topology should be statistically indistinguishable from zero. Again, there is a possible multiple tests problem if all three are tested at a nominal value of 95%.

The K invariants are differences between the L invariants. When one of the tables is expected to have crossproduct difference zero, the other two are expected to be nonzero, and also to be equal. So the difference of their crossproduct differences can be taken; this is the K invariant. It is not so easily tested.

The assumptions of Cavender's invariants are different from those of Lake's. One obviously need not assume anything about the frequencies of, or transitions among, the two different purines or the two different pyrimidines. However one does need to assume independent events at each site, and one needs to assume that the Y and R states are symmetric, that the probability per unit time that a Y changes into an R is the same as the probability that an R changes into a Y, so that we expect equal frequencies of the two states. There is also an assumption that all sites are changing between these two states at the same expected rate. This assumption is not needed for Lake's invariants, since expectations of sums are equal to sums of expectations, but for Cavender's it is, since products of expectations are not equal to expectations of products.

It is helpful to have both sorts of invariants available; with further work we may appreciate what other invaraints there are for various models of nucleic acid change.

INPUT FORMAT

The input data for DNAINVAR is standard. The first line of the input file contains the number of species (which must always be 4 for this version of DNAINVAR) and the number of sites.

Next come the species data. Each sequence starts on a new line, has a ten-character species name that must be blank-filled to be of that length, followed immediately by the species data in the one-letter code. The sequences must either be in the "interleaved" or "sequential" formats described in the Molecular Sequence Programs document. The I option selects between them. The sequences can have internal blanks in the sequence but there must be no extra blanks at the end of the terminated line. Note that a blank is not a valid symbol for a deletion.

The options are selected using an interactive menu. The menu looks like this:


Nucleic acid sequence Invariants method, version 3.6a3

Settings for this run:
  W                       Sites weighted?  No
  M           Analyze multiple data sets?  No
  I          Input sequences interleaved?  Yes
  0   Terminal type (IBM PC, ANSI, none)?  (none)
  1    Print out the data at start of run  No
  2  Print indications of progress of run  Yes
  3      Print out the counts of patterns  Yes
  4              Print out the invariants  Yes

  Y to accept these or type the letter for one to change

The user either types "Y" (followed, of course, by a carriage-return) if the settings shown are to be accepted, or the letter or digit corresponding to an option that is to be changed.

The options W, M and 0 are the usual ones. They are described in the main documentation file of this package. Option I is the same as in other molecular sequence programs and is described in the documentation file for the sequence programs.

OUTPUT FORMAT

The output consists first (if option 1 is selected) of a reprinting of the input data, then (if option 2 is on) tables of observed pattern frequencies and pattern type frequencies. A table will be printed out, in alphabetic order AAAA through TTTT of all the patterns that appear among the sites and the number of times each appears. This table will be invaluable for computation of any other invariants. There follows another table, of pattern types, using the 1234 notation, in numerical order 1111 through 1234, of the number of times each type of pattern appears. In this computation all sites at which there are any ambiguities or deletions are omitted. Cavender's invariants could actually be computed from sites that have only Y or R ambiguities; this will be done in the next release of this program.

If option 3 is on the invariants are then printed out, together with their statistical tests. For Lake's invariants the two sums which are expected to be equal are printed out, and then the result of an one-tailed exact binomial test which tests whether the difference is expected to be this positive or more. The P level is given (but remember the multiple-tests problem!).

For Cavender's L invariants the contingency tables are given. Each is tested with a one-tailed chi-square test. It is possible that the expected numbers in some categories could be too small for valid use of this test; the program does not check for this. It is also possible that the chi-square could be significant but in the wrong direction; this is not tested in the current version of the program. To check it beware of a chi-square greater than 3.841 but with a positive invariant. The invariants themselves are computed, as the difference of cross-products. Their absolute magnitudes are not important, but which one is closest to zero may be indicative. Significantly nonzero invariants should be negative if the model is valid. The K invariants, which are simply differences among the L invariants, are also printed out without any test on them being conducted. Note that it is possible to use the bootstrap utility SEQBOOT to create multiple data sets, and from the output from sunning all of these get the empirical variability of these quadratic invariants.

PROGRAM CONSTANTS

The constants that are defined at the beginning of the program include "maxsp", which must always be 4 and should not be changed.

The program is very fast, as it has rather little work to do; these methods are just a little bit beyond the reach of hand tabulation. Execution speed should never be a limiting factor.

FUTURE OF THE PROGRAM

In a future version I hope to allow for Y and R codes in the calculation of the Cavender invariants, and to check for significantly negative cross-product differences in them, which would indicate violation of the model. By then there should be more known about invariants for larger number of species, and any such advances will also be incorporated.


TEST DATA SET

   4   13
Alpha     AACGTGGCCAAAT
Beta      AAGGTCGCCAAAC
Gamma     CATTTCGTCACAA
Delta     GGTATTTCGGCCT


TEST SET OUTPUT (run with all numerical options turned on)


Nucleic acid sequence Invariants method, version 3.6a3

 4 species,  13  sites

Name            Sequences
----            ---------

Alpha        AACGTGGCCA AAT
Beta         ..G..C.... ..C
Gamma        C.TT.C.T.. C.A
Delta        GGTA.TT.GG CC.



   Pattern   Number of times

     AAAC         1
     AAAG         2
     AACC         1
     AACG         1
     CCCG         1
     CCTC         1
     CGTT         1
     GCCT         1
     GGGT         1
     GGTA         1
     TCAT         1
     TTTT         1


Symmetrized patterns (1, 2 = the two purines  and  3, 4 = the two pyrimidines
                  or  1, 2 = the two pyrimidines  and  3, 4 = the two purines)

     1111         1
     1112         2
     1113         3
     1121         1
     1132         2
     1133         1
     1231         1
     1322         1
     1334         1

Tree topologies (unrooted): 

    I:  ((Alpha,Beta),(Gamma,Delta))
   II:  ((Alpha,Gamma),(Beta,Delta))
  III:  ((Alpha,Delta),(Beta,Gamma))


Lake's linear invariants
 (these are expected to be zero for the two incorrect tree topologies.
  This is tested by testing the equality of the two parts
  of each expression using a one-sided exact binomial test.
  The null hypothesis is that the first part is no larger than the second.)

 Tree                             Exact test P value    Significant?

   I      1    -     0   =     1       0.5000               no
   II     0    -     0   =     0       1.0000               no
   III    0    -     0   =     0       1.0000               no


Cavender's quadratic invariants (type L) using purines vs. pyrimidines
 (these are expected to be zero, and thus have a nonsignificant
  chi-square, for the correct tree topology)
They will be misled if there are substantially
different evolutionary rate between sites, or
different purine:pyrimidine ratios from 1:1.

  Tree I:

   Contingency Table

      2     8
      1     2

   Quadratic invariant =             4.0

   Chi-square =    0.23111 (not significant)


  Tree II:

   Contingency Table

      1     5
      1     6

   Quadratic invariant =            -1.0

   Chi-square =    0.01407 (not significant)


  Tree III:

   Contingency Table

      1     2
      6     4

   Quadratic invariant =             8.0

   Chi-square =    0.66032 (not significant)




Cavender's quadratic invariants (type K) using purines vs. pyrimidines
 (these are expected to be zero for the correct tree topology)
They will be misled if there are substantially
different evolutionary rate between sites, or
different purine:pyrimidine ratios from 1:1.
No statistical test is done on them here.

  Tree I:              -9.0
  Tree II:              4.0
  Tree III:             5.0